Maxguard NP HA is a top quality gelcoat that combines the properties of low emission volatile organic substances with excellent processing properties.
The special LE technology developed by Ashland reduces VOC emissions by about 50%. This means both improved working conditions and lower gelcoat consumption.
Maxguard NP gelcoat gives the product the highest resistance to UV radiation and osmosis and has excellent mechanical properties.
It is produced on the basis of IZO/NPG resin.
The SA version is suitable for gun spraying.
- The gelcoat should be thoroughly mixed before use,
- temperature of the room, raw materials and tools used should be within the range of 18 – 25°C, with relative humidity below 70%,
- amount of catalyst used (MEKP) should be within the range of 1.5 – 2.5%,
- the thickness of the layer of gelcoat applied should be within the range of 600 – 1000 µm.
Maxguard NP meets the requirements of insurance associations such as Det Norske Veritas and Lloyd’s Register of Shipping for the construction of small vessels.
C-L Sp. z o.o. has the possibility to produce gelcoat in any colour of the RAL and INSTINT pallets.
The minimum number of orders from the aforementioned colour pallets is 1 hob (approx. 20 kg).